Before an experiment, the GCE was polished successively with 0 1-

Before an experiment, the GCE was polished successively with 0.1-μm γ-Al2O3 powder, and then on a polishing cloth. Residual polishing material was removed from the electrode surface by ultrasonic agitation in concentrated HNO3, distilled water, and absolute ethanol. Then, the GCE

was coated with 10 μl of laccase immobilized by SmBO3-Nafion suspension (1 mg · ml-1) and the solvent evaporated under room temperature for 1 h. The modified electrode was cleaned with distilled water before use. Results and discussion SEM studies Figure 2a shows SEM micrographs of as-prepared SmBO3 multilayer obtained via the additive-free S-S-H CH5424802 mw method at 200°C for 36 h. Figure 2b was the corresponding high-magnified images. The multilayer shapes consist of multilayer nanosheets. Acalabrutinib nmr These nanosheets have typical diameters of 3 ~ 5 μm while the thickness of the single layer are in the range of 10 ~ 80 nm. These microparticles are nonaggregated

with narrow size distribution. The pseudo-vaterite self-assembled SmBO3 multilayers exhibit advantages in high-ratio surface area and analogy-graphite layer structure, which are favorable for potential application in enzyme immobilization. Figure 2c shows that the laccase was effectively filled among layers of SmBO3 by physical absorption. Inspired by this, we inferred the multilayer structures of SmBO3 suitable for immobilization of other enzymes. Figure 2 Typical SEM images of as-prepared SmBO 3 (a), corresponding high-magnified images (b), and immobilized laccase images (c). The XRD pattern analysis of as-prepared SmBO3 samples To ascertain the structure of as-prepared SmBO3 samples, corresponding XRD SPTBN5 patterns of samples were investigated and shown in Figure 3. The pattern is inconsistent with aragonite-type, which are indexed in the standard pattern database listed in JCPDS. To make clear the crystal structure,

the MDI Jade (5.0 Edition) software was applied to auto index the similar patterns in JCPDS. It was found that the peak positions are in accordance with the primitive-lattice hexagonal phase SmBO3 (No. 13-0479). Figure 3 XRD pattern of SmBO 3 via S-S-H method at 200°C for 36 h. FTIR spectra analysis Figure 4a shows FTIR spectra of SmBO3 prepared via the S-S-H method at 200°C for 36 h. The absorbance peaks are assigned to the vibration mode of the ring anion B3O9 9-. A feature of this model is that the B3O9 9- group is involving a planar ring with D3 symmetry. The assignment model is proposed in hexagonal LnBO3 as follows: Due to the stretching vibrations of the ring sketch of the cyclic trimeric ion and the terminal B-O and bending vibrations of them, the absorption bands in the region of 800 to 1,200 cm-1and below 500 cm-1, respectively [31–34]. To investigate the binding between the laccase and the laminated SmBO3 multilayers, FTIR spectra for the laminated SmBO3 multilayers, lacasse, and laminated SmBO3 multilayers with immobilized laccase were measured.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>